View AUIRLS3034_7524621.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

11/29/11 www.irf.com 1 hexfet power mosfet s d g 97716a AUIRLS3034 gds gate drain source d g d 2 pak AUIRLS3034 s automotive grade features advanced process technology ultra low on-resistance dynamic dv/dt rating 175c operating temperature fast switching repetitive avalanche allowed up to tjmax lead-free, rohs compliant automotive qualified * hexfet ? is a registered trademark of international rectifier. * qualification standards can be found at http://www.irf.com/ absolute maximum ratings stresses beyond those listed under ?absolute maximum ratings? may cause permanent damage to the device. these are stress rati ngs only; and functional operation of the device at these or any other condition beyond those indicated in the specifications is not implied. exposure to absolute- maximum-rated conditions for extended periods may affect device reliability. the thermal resistance and power dissipation ratin gs are measured under board mounted and still air conditions. ambient temperature (t a ) is 25c, unless otherwise specified. symbol parameter units i d @ t c = 25c continuous drain current, v gs @ 10v (silicon limited) i d @ t c = 100c continuous drain current, v gs @ 10v (silicon limited) i d @ t c = 25c continuous drain current, v gs @ 10v (package limited) i dm pulsed drain current p d @t c = 25c maximum power dissipation w linear derating factor w/c v gs gate-to-source voltage v e as single pulse avalanche energy (thermally limited) mj i ar avalanche current a e ar repetitive avalanche energy mj dv/dt peak diode recovery v/ns t j operating junction and t stg storage temperature range soldering temperature, for 10 seconds (1.6mm from case) mounting torque, 6-32 or m3 screw thermal resistance symbol parameter typ. max. units r ? jc junction-to-case ??? 0.4 r ? ja junction-to-ambient (pcb mount) ??? 40 a c c/w 375 4.6 20 2.5 10lbf in (1.1n m) -55 to + 175 300 max. 343 243 1372 195 255 see fig. 14, 15, 22a, 22b, v dss 40v r ds(on) typ. 1.4m ? ? i d (package limited) 195a description specifically designed for automotive applications, this hexfet ? power mosfet utilizes the latest processing techniques to achieve extremely low on-resistance per silicon area. additional features of this design are a 175c junction operating temperature, fast switching speed and improved repetitive avalanche rating . these features combine to make this design an extremely efficient and reliable device for use in automotive applications and a wide variety of other applications.

2 www.irf.com pulse width ? 400 s; duty cycle ? 2%. c oss eff. (tr) is a fixed capacitance that gives the same charging time as c oss while v ds is rising from 0 to 80% v dss . c oss eff. (er) is a fixed capacitance that gives the same energy as c oss while v ds is rising from 0 to 80% v dss . when mounted on 1" square pcb (fr-4 or g-10 material). for recommended footprint and soldering techniques refer to applocation note # an-994. ?

? jc
calcuted continuous current based on maximum allowable junction temperature bond wire current limit is 195a. note that current limitation arising from heating of the device leds may occur with some lead mounting arrangements. repetitive rating; pulse width limited by max. junction temperature. limited by t jmax , starting t j = 25c, l = 0.013mh r g = 25 ? , i as = 195a, v gs =10v. part not recommended for use above this value .
i sd ? 195a, di/dt ? 841a/ s, v dd ?? v (br)dss , t j ? 175c. s d g static electrical characteristics @ t j = 25c (unless otherwise specified) symbol parameter min. typ. max. units v (br)dss drain-to-source breakdown voltage 40 ??? ??? v ? ? ? i dss drain-to-source leakage current ??? ??? 20 ??? ??? 250 i gss gate-to-source forward leakage ??? ??? 100 gate-to-source reverse leakage ??? ??? -100 dynamic electrical characteristics @ t j = 25c (unless otherwise specified) symbol parameter min. typ. max. units q g total gate charge ??? 108 162 q gs gate-to-source charge ??? 29 ??? q gd gate-to-drain ("miller") charge ??? 54 ??? q sync total gate charge sync. (q g - q gd ) ??? 54 ??? t d(on) turn-on delay time ??? 65 ??? t r rise time ??? 827 ??? t d(off) turn-off delay time ??? 97 ??? t f fall time ??? 355 ??? c iss input capacitance ??? 10315 ??? c oss output capacitance ??? 1980 ??? c rss reverse transfer capacitance ??? 935 ??? c oss eff. (er) effective output capacitance (energy related) ??? 2378 ??? c oss eff. (tr) effective output capacitance (time related) ??? 2986 ??? diode characteristics symbol parameter min. typ. max. units i s continuous source current ??? ??? (body diode) i sm pulsed source current ??? ??? (body diode) v sd diode forward voltage ??? ??? 1.3 v t rr reverse recovery time ??? 39 ??? t j = 25c v r = 34v, ??? 41 ??? t j = 125c i f = 195a q rr reverse recovery charge ??? 39 ??? t j = 25c di/dt = 100a/ s ??? 46 ??? t j = 125c i rrm reverse recovery current ??? 1.7 ??? a t j = 25c t on forward turn-on time intrinsic turn-on time is negligible (turn-on is dominated by ls+ld) v ds = 10v, i d = 195a v gs = 4.5v, i d = 172a m ? i d = 195a r g = 2.1 ? v dd = 26v i d = 185a, v ds =0v, v gs = 4.5v conditions i d = 185a r ds(on) static drain-to-source on-resistance pf a 343 1372 nc a na nc ns v ds = v gs , i d = 250 a v ds = 40v, v gs = 0v v ds = 40v, v gs = 0v, t j = 125c ns v gs = 0v, v ds = 0v to 32v mosfet symbol t j = 25c, i s = 195a, v gs = 0v integral reverse p-n junction diode. v gs = 20v conditions v gs = 0v, i d = 250 a reference to 25c, i d = 5ma v gs = 10v, i d = 195a v gs = -20v showing the v ds = 20v conditions v gs = 4.5v v gs = 0v v ds = 25v ? = 1.0mhz v gs = 0v, v ds = 0v to 32v

www.irf.com 3

! " #$% &'(') )
* + +,
+ qualification information ? d 2 pak msl1 rohs compliant yes esd machine model class m4 (+/- 800v) ??? aec-q101-002 human body model class h3a (+/- 6000v) ??? aec-q101-001 charged device model class c5 (+/- 2000v) ??? aec-q101-005 qualification level automotive (per aec-q101) ?? comments: this part number(s) passed automotive qualification. ir?s industrial and consumer qualification level is granted by extension of the higher automotive level. moisture sensitivity level

4 www.irf.com fig 1. typical output characteristics fig 3. typical transfer characteristics fig 4. normalized on-resistance vs. temperature fig 2. typical output characteristics fig 6. typical gate charge vs. gate-to-source voltage fig 5. typical capacitance vs. drain-to-source voltage 1 2 3 4 5 v gs , gate-to-source voltage (v) 0.1 1 10 100 1000 10000 i d , d r a i n - t o - s o u r c e c u r r e n t ( a ) t j = 25c t j = 175c v ds = 25v ? 60 s pulse width -60 -40 -20 0 20 40 60 80 100 120 140 160 180 t j , junction temperature (c) 0.5 1.0 1.5 2.0 r d s ( o n ) , d r a i n - t o - s o u r c e o n r e s i s t a n c e ( n o r m a l i z e d ) i d = 195a v gs = 10v 1 10 100 v ds , drain-to-source voltage (v) 100 1000 10000 100000 c , c a p a c i t a n c e ( p f ) v gs = 0v, f = 1 mhz c iss = c gs + c gd , c ds shorted c rss = c gd c oss = c ds + c gd c oss c rss c iss 0 20 40 60 80 100 120 140 q g , total gate charge (nc) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 v g s , g a t e - t o - s o u r c e v o l t a g e ( v ) v ds = 32v v ds = 20v i d = 185a 0.1 1 10 100 v ds , drain-to-source voltage (v) 1 10 100 1000 10000 100000 i d , d r a i n - t o - s o u r c e c u r r e n t ( a ) vgs top 15v 10v 8.0v 4.5v 3.5v 3.0v 2.7v bottom 2.5v ? 60 s pulse width tj = 25c 2.5v 0.1 1 10 100 v ds , drain-to-source voltage (v) 10 100 1000 10000 100000 i d , d r a i n - t o - s o u r c e c u r r e n t ( a ) vgs top 15v 10v 8.0v 4.5v 3.5v 3.0v 2.7v bottom 2.5v ? 60 s pulse width tj = 175c 2.5v

www.irf.com 5 fig 8. maximum safe operating area fig 10. drain-to-source breakdown voltage fig 7. typical source-drain diode forward voltage fig 11. typical c oss stored energy fig 9. maximum drain current vs. case temperature fig 12. maximum avalanche energy vs. draincurrent 0.0 0.5 1.0 1.5 2.0 2.5 v sd , source-to-drain voltage (v) 1.0 10 100 1000 10000 i s d , r e v e r s e d r a i n c u r r e n t ( a ) t j = 25c t j = 175c v gs = 0v -60 -40 -20 0 20 40 60 80 100 120 140 160 180 t j , temperature ( c ) 40 42 44 46 48 50 v ( b r ) d s s , d r a i n - t o - s o u r c e b r e a k d o w n v o l t a g e ( v ) id = 5ma 0 5 10 15 20 25 30 35 40 45 v ds, drain-to-source voltage (v) 0.0 0.5 1.0 1.5 2.0 2.5 e n e r g y ( j ) 25 50 75 100 125 150 175 starting t j , junction temperature (c) 0 200 400 600 800 1000 1200 e a s , s i n g l e p u l s e a v a l a n c h e e n e r g y ( m j ) i d top 38.9a 65.3a bottom 195a 25 50 75 100 125 150 175 t c , case temperature (c) 0 50 100 150 200 250 300 350 i d , d r a i n c u r r e n t ( a ) limited by package 0.1 1 10 100 v ds , drain-to-source voltage (v) 0.1 1 10 100 1000 10000 i d , d r a i n - t o - s o u r c e c u r r e n t ( a ) operation in this area limited by r ds (on) tc = 25c tj = 175c single pulse 100 sec 1msec 10msec dc limited by package

6 www.irf.com fig 13. maximum effective transient thermal impedance, junction-to-case fig 14. typical avalanche current vs.pulsewidth fig 15. maximum avalanche energy vs. temperature notes on repetitive avalanche curves , figures 14, 15: (for further info, see an-1005 at www.irf.com) 1. avalanche failures assumption: purely a thermal phenomenon and failure occurs at a temperature far in excess of t jmax . this is validated for every part type. 2. safe operation in avalanche is allowed as long ast jmax is not exceeded. 3. equation below based on circuit and waveforms shown in figures 16a, 16b. 4. p d (ave) = average power dissipation per single avalanche pulse. 5. bv = rated breakdown voltage (1.3 factor accounts for voltage increase during avalanche). 6. i av = allowable avalanche current. 7. ? t = allowable rise in junction temperature, not to exceed t jmax (assumed as 25c in figure 14, 15). t av = average time in avalanche. d = duty cycle in avalanche = t av f z thjc (d, t av ) = transient thermal resistance, see figures 13) p d (ave) = 1/2 ( 1.3bvi av ) = t/ z thjc i av = 2 t/ [1.3bvz th ] e as (ar) = p d (ave) t av 25 50 75 100 125 150 175 starting t j , junction temperature (c) 0 50 100 150 200 250 300 e a r , a v a l a n c h e e n e r g y ( m j ) top single pulse bottom 1.0% duty cycle i d = 195a 1e-006 1e-005 0.0001 0.001 0.01 0.1 t 1 , rectangular pulse duration (sec) 0.001 0.01 0.1 1 t h e r m a l r e s p o n s e ( z t h j c ) c / w 0.20 0.10 d = 0.50 0.02 0.01 0.05 single pulse ( thermal response ) notes: 1. duty factor d = t1/t2 2. peak tj = p dm x zthjc + tc ? j ? j ? 1 ? 1 ? 2 ? 2 ? 3 ? 3 r 1 r 1 r 2 r 2 r 3 r 3 ci i ? ri ci= ? i ? ri ? ? c ? 4 ? 4 r 4 r 4 ri (c/w) ?? i (sec) 0.02477 0.000025 0.08004 0.000077 0.19057 0.001656 0.10481 0.008408 1.0e-06 1.0e-05 1.0e-04 1.0e-03 1.0e-02 1.0e-01 tav (sec) 1 10 100 1000 a v a l a n c h e c u r r e n t ( a ) 0.05 duty cycle = single pulse 0.10 allowed avalanche current vs avalanche pulsewidth, tav, assuming ?? j = 25c and tstart = 150c. 0.01 allowed avalanche current vs avalanche pulsewidth, tav, assuming ? tj = 150c and tstart =25c (single pulse)

www.irf.com 7 -#
,#&, fig 16. threshold voltage vs. temperature -#
.& +,
-#
,#&, -#
.& +, -75 -50 -25 0 25 50 75 100 125 150 175 t j , temperature ( c ) 0.0 0.5 1.0 1.5 2.0 2.5 3.0 v g s ( t h ) , g a t e t h r e s h o l d v o l t a g e ( v ) i d = 250 a i d = 1.0ma id = 1.0a 0 100 200 300 400 500 di f /dt (a/ s) 0 100 200 300 400 q r r ( a ) i f = 78a v r = 34v t j = 25c t j = 125c 0 100 200 300 400 500 di f /dt (a/ s) 0 100 200 300 400 q r r ( a ) i f = 117a v r = 34v t j = 25c t j = 125c 0 100 200 300 400 500 di f /dt (a/ s) 0 2 4 6 8 10 12 14 i r r m ( a ) i f = 78a v r = 34v t j = 25c t j = 125c 0 100 200 300 400 500 di f /dt (a/ s) 0 2 4 6 8 10 12 14 i r r m ( a ) i f = 117a v r = 34v t j = 25c t j = 125c

8 www.irf.com fig 23a. switching time test circuit fig 23b. switching time waveforms fig 22b. unclamped inductive waveforms fig 22a. unclamped inductive test circuit t p v (br)dss i as r g i as 0.01 ? t p d.u.t l v ds + - v dd driver a 15v 20v v gs fig 24a. gate charge test circuit fig 24b. gate charge waveform vds vgs id vgs(th) qgs1 qgs2 qgd qgodr fig 21. / ,#,-& for n-channel hexfet power mosfets
?????
???? ????

p.w. period di/dt diode recovery dv/dt ripple ? 5% body diode forward drop re-applied voltage reverse recovery current body diode forward current v gs =10v v dd i sd driver gate drive d.u.t. i sd waveform d.u.t. v ds waveform inductor curent d = p. w . period 0
!"#!$# 0 + - + + + - - -
??? ! ??? "#$## ??? % && ??? #$##'$

d.u.t. v ds i d i g 3ma v gs .3 ? f 50k ? .2 ? f 12v current regulator same type as d.u.t. current sampling resistors + - v ds 90% 10% v gs t d(on) t r t d(off) t f ( ) ???? * % ??????? $% & + -

www.irf.com 9

(dimensions are shown in millimeters (inches))

1& 2 1+ & 343 5545/5/ %4%,61 7

10 www.irf.com !
3 4 4 trr feed direction 1.85 (.073) 1.65 (.065) 1.60 (.063) 1.50 (.059) 4.10 (.161) 3.90 (.153) trl feed direction 10.90 (.429) 10.70 (.421) 16.10 (.634) 15.90 (.626) 1.75 (.069) 1.25 (.049) 11.60 (.457) 11.40 (.449) 15.42 (.609) 15.22 (.601) 4.72 (.136) 4.52 (.178) 24.30 (.957) 23.90 (.941) 0.368 (.0145) 0.342 (.0135) 1.60 (.063) 1.50 (.059) 13.50 (.532) 12.80 (.504) 330.00 (14.173) max. 27.40 (1.079) 23.90 (.941) 60.00 (2.362) min. 30.40 (1.197) max. 26.40 (1.039) 24.40 (.961) notes : 1. comforms to eia-418. 2. controlling dimension: millimeter. 3. dimension measured @ hub. 4. includes flange distortion @ outer edge.

www.irf.com 11 ordering information base part number package type standard pack complete part number form quantity AUIRLS3034 d2pak tube 50 AUIRLS3034 tape and reel left 800 AUIRLS3034trl tape and reel right 800 AUIRLS3034trr

12 www.irf.com
unless specifically designated for the automotive market, international rectifier corporation and its subsidiaries (ir) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to disco ntinue any product or services without notice. part numbers designated with the ?au? prefix follow automotive industry and / or customer specific req uirements with regards to product discontinuance and process change notification. all products are sold subject to ir?s terms and conditions of sale s upplied at the time of order acknowledgment. ir warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with ir?s s tandard warranty. testing and other quality control techniques are used to the extent ir deems necessary to support this warranty. except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. ir assumes no liability for applications assistance or customer product design. customers are responsible for their products an d applications using ir components. to minimize the risks with customer products and applications, customers should provide adequate design and operati ng safeguards. reproduction of ir information in ir data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. reproduction of this information with alterations is an unfair an d deceptive business practice. ir is not responsible or liable for such altered documentation. information of third parties may be subject to additional rest rictions. resale of ir products or serviced with statements different from or beyond the parameters stated by ir for that product or serv ice voids all express and any implied warranties for the associated ir product or service and is an unfair and deceptive business practice. ir is not re sponsible or liable for any such statements. ir products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the b ody, or in other applications intended to support or sustain life, or in any other application in which the failure of the ir product could create a situatio n where personal injury or death may occur. should buyer purchase or use ir products for any such unintended or unauthorized application, buyer shall ind emnify and hold international rectifier and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, co sts, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ir was negligent regarding the design or manufacture of the product. only products certified as military grade by the defense logistics agency (dla) of the us department of defense, are designed a nd manufactured to meet dla military specifications required by certain military, aerospace or other applications. buyers acknowledge and agree that any use of ir products not certified by dla as military-grade, in applications requiring military grade products, is solely at the buyer?s ow n risk and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. ir products are neither designed nor intended for use in automotive applications or environments unless the specific ir product s are designated by ir as compliant with iso/ts 16949 requirements and bear a part number including the designation ?au?. buyers acknowledge and agre e that, if they use any non-designated products in automotive applications, ir will not be responsible for any failure to meet such requirements. for technical support, please contact ir?s technical assistance center http://www.irf.com/technical-info/ world headquarters: 101 n. sepulveda blvd., el segundo, california 90245 tel: (310) 252-7105

▲Up To Search▲

Price & Availability of AUIRLS3034

	To Download AUIRLS3034 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .